KWM Gutterman IronMan Half-Round G2, Operating And Maintenance Troubleshooting Manual

Page: 8 / 23

7
SECTION
3
ELECTRICAL SYSTEM AND CONTROL LOCATIONS
1E. MAIN OPERATORS PANEL ( located on the lip side of the machine at the exit end)
The main operators panel consists of:
(2) Selector switch. (JOG/RUN & FORWARD/REVERSE)
(2) Push button. (START & STOP)
2E. ENTRY OPERATORS PANEL (located on the lip side of the machine at the entrance end)
The entry operator’s panel consists of:
(1) Jog button (push button)
(1) Emergency stop button. (power shut off)
ELECTRICAL CORD REQUIREMENTS
It is important that the motor manufactures minimum wire gage be adhered to in order to maintain the
warranty on motor.
LENGTH GAGE CORD
0 – 25’ 12 ga
25 – 50’ 10 ga
50 – 100’ 7 ga