KWM Gutterman IronMan Half-Round G2, Operating And Maintenance Troubleshooting Manual

Page: 19 / 23

1
8
SECTION
1 0
GUILLOTINE AND FACE PLATE ASSEMBLY
The guillotine assembly is machined to very tight tolerance, requiring that it be maintained on a
regular basis. If the guillotine assembly is kept clean, lubricated and all hardware tight, you can
expect trouble free performance for years to come.
DAILY MAINTENANCE:
Lubricate GUILLOTINE blade using
WD40.
ADJUSTING GUILLOTINE POSITION
The guillotine is moveable in all directions.
UP & DOWN ADJUSTMENT
1. loosen bolt A six places, loosen locking nut C on adjustment bolt B two places.
2. Turn adjustment B clockwise to raise and counter clockwise to lower.
3. Retighten locking nut C when desired position is reached
SIDE TO SIDE ADJUSTMENT
1. Loosen bolt A six places, The guillotine is now free to move in all directions.
2. After the desired position is acquired, retighten A six places.