©2020 Spectrum Brands, Inc.
If programming is successful, the lock button will flash green once
with one long beep.
If programming is unsuccessful, the lock button will flash red three times
with three beeps. Make sure to enter the same valid code in steps 5 and
7. Make sure to enter a valid Mastercode in step 3.
9. While the door is open and locked, test the user code to make sure it
no longer unlocks the door.
1. Keep door open. Press the Program button once. The lock button will
flash green and you will hear three beeps.
2. Press Lock button once.
3. Enter Mastercode.
4. Press Lock button once.
5. Press “9-0” six times.
6. Press Lock button once.
Procedure continued on next page
Mastercode (cont.)
61899 Rev 01
5 / 18
Technical Support
1-866-863-6584
www.kwikset.com
E
Deleting All User Codes with the Mastercode Enabled
1
