KwikGoal 9B54 Assembly Instructions Manual Download

Page: 12 / 18

12. Hardware for this step is in

Panel Hdw

packs.

Repeat step 10 to attach center panels to crossbars then connect center panels together until the only 1

center panel is left. Remember to move unneeded square nuts on top and bottom crossbars out from under
the center panel being attached before bolting center panel in place.

THIS UNIT MUST BE ANCHORED ACCORDING TO THESE INSTRUCTIONS AT ALL TIMES

5/16” x 3- 3/4” Hex Bolt

5/16” Flat Washer

Center Panel

Top Crossbar

5/16” Flat Washer

5/16” Lock Nut

Rear Panel

Bottom Crossbar

3/8” Square Nut

5/16” x 3- 3/4” Hex Bolt

5/16” Flat” Washer

5/16” Flat Washer

5/16” Lock Nut

Center Panel

3/8” x 7/8” Hex Bolt

3/8” Lock Washer

3/8” Flat Washer

Bottom Crossbar

Center Panel

NZ420 Rev. 12/04/19

Move unneeded square nuts in top & bottom
crossbars away from panel at least a panel width.

THIS EQUIPMENT MUST BE STORED IN A SECURED, SHELTERED AREA WHEN NOT IN USE OR IN THE THREAT

OF HIGH WINDS. ANY WEATHER DAMAGE TO THIS EQUIPMENT WILL NOT BE COVERED UNDER KWIK GOAL’S

PRODUCT GUARANTEE. DO NOT LEAVE THIS EQUIPMENT UNATTENDED.

Summary of Contents for 9B54



















Search results

Summary of Contents for 9B54

Reviews:

Related manuals for 9B54

Brands by name

Popular brands

KwikGoal 9B54, Assembly Instructions Manual

Search results

Summary of Contents for 9B54

Reviews:

Related manuals for 9B54

Brands by name

Popular brands