NOTE: Square nuts will float loose in channels until used later.
Assemble crossbar, bases, and post corners. Press joints together firmly before tightening bolts.
4. Hardware for this step is in
Frame Hdw
&
Panel Hdw
packs.
THIS UNIT MUST BE ANCHORED ACCORDING TO THESE INSTRUCTIONS AT ALL TIMES
NZ420 Rev. 12/04/19
Socket Head Cap Screw
3/8” x 1”
3/8” Lock Washer
Crossbar
Right Base
3/8” Square Nut
Left Base
Crossbar
3/8” Lock Washer
Socket Head Cap Screw
3/8” x 1”
3/8” Square Nut (Qty=Center Panel Qty - 1)
Example: eight center panels = seven 3/8” square nuts
Post Corner
3/8” Square Nut
3/8” Lock Washer
3/8” x 1” Socket Head Cap Screw
Base
THIS EQUIPMENT MUST BE STORED IN A SECURED, SHELTERED AREA WHEN NOT IN USE OR IN THE THREAT
OF HIGH WINDS. ANY WEATHER DAMAGE TO THIS EQUIPMENT WILL NOT BE COVERED UNDER KWIK GOAL’S
PRODUCT GUARANTEE. DO NOT LEAVE THIS EQUIPMENT UNATTENDED.
