Crossbar
(43”)
Lower Brace Line
Panels
Seal Panel to Panel Joints
22. If desired, panel joints may be sealed with a small bead of urethane sealant. Seal across crossbar to panel
joint, then panel to panel joints.
NOTE: Panel to panel joints should only be sealed between crossbar and lower brace of panels.
Sealant below lower brace line is not necessary.
Prevent sealant material from contacting polycarbonate.
Panel to
Panel Joints
Crossbar
Panel
Polycarbonate
THIS UNIT MUST BE ANCHORED ACCORDING TO THESE INSTRUCTIONS AT ALL TIMES
NZ420 Rev. 12/04/19
THIS EQUIPMENT MUST BE STORED IN A SECURED, SHELTERED AREA WHEN NOT IN USE OR IN THE THREAT
OF HIGH WINDS. ANY WEATHER DAMAGE TO THIS EQUIPMENT WILL NOT BE COVERED UNDER KWIK GOAL’S
PRODUCT GUARANTEE. DO NOT LEAVE THIS EQUIPMENT UNATTENDED.