10. Hardware for this step is in
Panel Hdw
packs.
Do NOT tighten bolts at this time.
Insert double end studs into left panel. Move unneeded square nuts in top and bottom crossbars away from
left side at least one center panel width.
Left Panel
Double End Stud
Top Crossbar
Double End Stud
THIS UNIT MUST BE ANCHORED ACCORDING TO THESE INSTRUCTIONS AT ALL TIMES
NZ420 Rev. 12/04/19
Right Panel
Left Panel
Bottom Crossbar
Top Crossbar
Move unneeded square nuts in top & bottom
crossbars away from panel at least a panel width.
THIS EQUIPMENT MUST BE STORED IN A SECURED, SHELTERED AREA WHEN NOT IN USE OR IN THE THREAT
OF HIGH WINDS. ANY WEATHER DAMAGE TO THIS EQUIPMENT WILL NOT BE COVERED UNDER KWIK GOAL’S
PRODUCT GUARANTEE. DO NOT LEAVE THIS EQUIPMENT UNATTENDED.
