EN
Instruction Manual
Hydropneumatic tool for rivet nuts from M3 to M10
with stroke and pressure adjustment
FASTSETM10
www.kvt-fastening.ch
4
1 -
GENERAL INFORMATION
1.1 -
ASSISTANCE
In case you need any assistance concerning the use and the maintenance of the tool, or in case you need to order any spare
parts, you shall contact your local authorized dealer (or
KVT - FASTENING
directly) specifying the identification/serial
numbers of the tool, written on its outer casing:
C 1
See section 3
1.2 -
CERTIFICATION AND EC MARKING
The tool is manufactured in compliance with the European Directives, which are in force when the tool itself is put on
the market.
As the tool is not included in ENCLOSURE IV of DIRECTIVE 2006/42/EC,
KVT - FASTENING
issues a self-
certification to apply the EC marking.
1.3 -
WARRANTY
The warranty has a validity of 12 months, as of the date indicated on the invoice.
The warranty only covers replaced parts; labour is not included.
The following are not covered by warranty:
standard accessories (see section 2.5) and tool damages caused by:
•
transport and/or handling,
•
user’s mistakes,
•
failed servicing/maintenance, as indicated in section 7 of this manual,
•
faults and/or breakages that are not attributable to tool anomalies,
•
normal consumption of consumables.
The warranty is invalidated both in case of unauthorised tampering/replacements of tool components and in case of use
of accessories, tools or consumables different to those recommended by the manufacturer, which could even cause injuries
to the tool’s user.
1.4 -
MANUAL STRUCTURE
This instruction manual must be read with particular attention by the Customer, as the correct pre-arrangement,
installation and use of the tool, are the correct basis for a good relationship between Manufacturer and Customer.
1.4.1 -
PURPOSE AND CONTENTS
The manual herein has the purpose of providing the Customer with all the information needed not only to use the tool
correctly, but also to manage it self-sufficiently and safely. It includes information concerning technical aspects,
operation, maintenance, spare parts and safety.
Users and Qualified Technicians must read the instructions given herein thoroughly before starting to use the tool
.
If you have any doubts on the meaning of the instructions given, please do not hesitate to contact
KVT - FASTENING
for
further explanations.
1.4.2 -
RECEIVERS
The manual herein has been written for both the operators and the technicians enabled to service the tool.
Operators must not carry out procedures reserved to service and/or qualified technicians
.
KVT - FASTENING
is not liable for any damage deriving from the failed observance of this rule.
