EN
Instruction Manual
Hydropneumatic tool for rivet nuts from M3 to M10
with stroke and pressure adjustment
FASTSETM10
www.kvt-fastening.ch
38
7.3.2 -
PARTS SUBJECT TO WEAR
On a periodic basis check the state of wear of the rubber base, as this is what ensures the stability of the tool. If it should
need replacing, order the spare base from
KVT - FASTENING
indicating the year/serial number of the tool (see section
4.5).
On a periodic basis check the state of wear of the screws and of the heads and, if necessary, replace them as indicated in
section 6.2.
Spare parts are to be ordered exclusively from
KVT - FASTENING
, specifying the codes listed in section 3.1.
