KVM gruppen DSIP-1000, User Manual

Page: 23 / 30

Step 5: After click Save button, the device shows Status LED
yellow and Power LED blink red. Turn off the device.
7.2 Firmware Upgrade
To upgrade the DSIP­1000T and DSIP­1000R, you should save
the new firmware into your PC or laptop first. A HTTP server is
embedded in each DSIP­1000T and DSIP­1000R. You can
upgrade firmware via web browser. The default IP address of the
DSIP­1000R is 192.168.168.22 and the DSIP­1000T is
192.168.168.21. The default IP address will not be changed no
matter what you configure the device IP address. You have to
disable antivirus software and firewall software until the firmware
upgrade process is accomplished.
Step 1:
You should save the new firmware into your PC or
laptop first.
Step 2: Assign the PC or laptop IP address through Control
Panel > Network Connections > Local Area
Connections > Status > Properties > Internet Protocol
(TCP/IP), Use the following IP address. Type the IP
address field with 192.168.168.11 and Subnet mask
with 255.255.255.0. After that press OK to save the
configuration.
Kvm groupe
http://www.kvmshop.dk
23