KVM gruppen DSIP-1000, User Manual

Page: 14 / 30

Red Red Power on but network connection is not
established.
Slide Switch Descriptions
[DVI]: The PC and the DSIP­1000T are connected with
DVI cable.
[VGA]: The PC and the DSIP­1000T are connected with
VGA cable.
[On]: Remote DSIP­1000R can use keyboard/mouse/IR
to control the PC.
[Off]: Remote DSIP­1000R cannot use
keyboard/mouse/IR to control the PC.
Push button Descriptions
Reset When the PC and the DSIP­1000T are connected with
VGA cable, sometimes the picture on the TV
connected to DSIP­1000R shifts from screen. This
push button is used to reset the output picture. Press
it to do auto adjustment.
4. 1. IR Blaster
The IR blaster is connected to the IR blaster socket at the rear
panel of the DSIP­1000T. When you press any key on any
infrared remote controller, the DSIP­1000R receives the IR signal
and transmits it to the DSIP­1000T. The IR signal is delivered to
the IR receiver through the LED on the IR blaster. To work
properly, the IR blaster LED must be facing the IR receiver of your
Windows Media Center Edition PC, TV tuner card or DVD player.
Kvm groupe
http://www.kvmshop.dk
14
LED
IR