Create a text silent-response file that includes the entries listed in the table below.
Table 3: Silent-Response File Entries for Linux
Description
Silent-Response File Entry
Path where to store the current Cisco Prime Network
Registrar installation files, but only if
PERFORM_BACKUP=y
BACKUPDIR=
Services (dhcp, dns or cdns) to enable
CCM_LOCAL_SERVICES=
Central Configuration Management (CCM) port; default
value is:
•
1234
if CNR_CCM_MODE=local
•
1244
if CNR_CCM_MODE=regional
CCM_PORT=
IPv4 address of the regional server
CCM_RGNL_IP_ADDR=
IPv6 address of the regional server
CCM_RGNL_IPV6_ADDR=
SCP port number on the regional server
CCM_RGNL_SCP_PORT=
Superuser name. To skip configuring the superuser
name, value should be CNR_ADMIN= unset.
CNR_ADMIN=
Non-root user. To install Cisco Prime Network Registrar
as non-root user, value must be NRADMIN=y.
NRADMIN=
Superuser password. To skip configuring the superuser
password, value should be CNR_PASSWORD= unset.
CNR_PASSWORD=
CCM mode; set to
local
or
regional
.
CNR_CCM_MODE=
Reserved for GSS installation. Introduced in Cisco Prime
Network Registrar 7.0; always set to
cnr
.
CNR_CCM_TYPE=
If set to
y
(recommended), tries to kill any open CLI
connections when installing or upgrading; otherwise,
basically deprecated.
CNR_EXISTS=
For Cisco Prime Network Registrar 7.x and later only,
the fully qualified path to the license file. Set
CNR_LICENSE_FILE =unset if
CNR_CCM_MODE=local for Cisco Prime Network
Registrar 8.x.
CNR_LICENSE_FILE=
Cisco Prime Network Registrar 9.1 Installation Guide
52
Performing a Silent Installation
Performing a Silent Installation