
C H A P T E R
6
Next Steps
This chapter contains the following sections:
•
Starting Cisco Prime Network Registrar, page 31
•
Starting and Stopping Servers, page 32
•
Starting and Stopping Servers using the Regional Web UI, page 34
Starting Cisco Prime Network Registrar
To administer the local and regional clusters that you have installed, you must enter the appropriate license
file (web UI) or the filename (CLI).
To enter license information in web UI or CLI:
Step 1
Start the Cisco Prime Network Registrar web UI or CLI:
•
To access the web UI, open the web browser and use the HTTP (nonsecure login) or HTTPS (secure login) website:
http://hostname:http-port
https://hostname:https-port
where:
◦
The
hostname
is the actual name of the target host.
◦
The http-port and the https-ports are the default HTTP or HTTPS port that are specified during installation.
(See the installation procedure,
Installing and Upgrading Cisco Prime Network Registrar, on page 17
).
On Windows, you can access the web UI from the Start menu from the local host:
◦
On a local cluster
—
Choose
Start
>
Programs
>
Network Registrar 9.1
>
Network Registrar 9.1 local
Web UI
(or
Network Registrar 9.1 local Web UI (secure)
if you enabled secure login).
Cisco Prime Network Registrar 9.1 Installation Guide
31