KVH Industries TracVision RV1, Installation Manual, Page: 9 / 38

8
Follow these steps to mount the antenna to the
roof.
a. Apply appropriate construction adhesive to
the bottom of the antenna’s four mounting
plates across all of the holes.
b. At the mounting location you chose in
Section 2 on page 4 , place the antenna on the
centerline of the roof so that the cable
connector faces the rear of the vehicle (see
Figure 11).
c. Attach the four antenna mounting plates to
the roof using 20 fasteners appropriate for the
roof’s construction (see Figure 11).
d. Seal all fasteners with silicone sealant (or
equivalent).
Cable Connector
Antenna
(Top View)
Antenna
(Top View)
Mounting
Plate (x4)
Ø0.19" Mounting
Hole (x20)
Front of Vehicle
Vehicle
Centerline
FWD
Figure 11: Mounting the Antenna
Due to the variation in RV roof construction,
consult with the RV manufacturer to
determine the safest fastening method.
IMPORTANT!
Mount the Antenna
6