24
Linear Receiver Setup for Automatic
Switching
For automatic switching to work properly using
the DiSEqC communications protocol, set up the
linear receiver for the same satellites installed in
the TracVision system. Set up the satellites in the
receiver in the exact same order as they were set
up in the antenna. The specific setup process
varies among receiver models – refer to the
receiver’s manual for details. Use the table below
and Figure 38 as a guide.
Satellites
in Antenna
Matching Satellites
in Receiver
Slot A
Port/Switch/LNB/DiSEqC 1 or A
Slot B
Port/Switch/LNB/DiSEqC 2 or B
Slot C
Port/Switch/LNB/DiSEqC 3 or C
Slot D
Port/Switch/LNB/DiSEqC 4 or D
Figure 38: Linear Receiver DiSEqC Settings (Example)
15
Continued
Setup the System
Summary of Contents for TracVision RV1
Page 1: ...KVH Industries Inc Installation Guide TracVision RV1...
Page 37: ......
