Road transport
54
Inserting the swath
former
Only insert the swath former in work position.
Release the T-screw.
Fully insert the swath former.
Tighten the T-screw.
Moving the machine
into the transport
position
Observe the instructions in »Prior to road transport«, page 51.
Keep the control cable on the mechanical lock tensioned.
Lift the rotors into the transport position using the single-acting
hydraulic control device on the tractor.
Release the mechanical lock control cable to secure the rotors.
Check that the locks of both lifting arms are engaged.
Swath former
T-screw
Make sure the machine is standing level
Before changing from the transport to the work position (and vice
versa), make sure the machine is standing level. The machine
could tip over, particularly on hillside locations. The machine could
be damaged and serious or fatal injuries could be caused.
