Maintenance
80
Lubrication points
for grease
Working with a
grease gun
Before applying the grease gun
•
clean lubricating nipples and
•
grease gun attachment fitting.
Lubricate the bearings with one or two presses of the grease gun. If
you feel resistance at the second press, do not press a second time.
Too much grease will force the bearings apart. Dust and dirt can pe-
netrate into the bearings. This leads to premature wear.
Lubricate the places listed in the illustration as follows:
•
after 50 hours of operation.
•
before and after the season.
•
each time after cleaning with a high-pressure cleaner..
Transport chassis and
steering
Attachment carrier
Lifting cylinder, lower side
1 x bearing housing
2 x rotor gears
Rotor chassis
4 x wheels
4 x lifting arm bearings
2 x wheels
Steering rod
Steering
