Road transport
57
Moving the
machine
into the transport
position
Switch on the tractor.
Before swivelling the rotors into the transport position, switch off the
PTO shaft and wait for the rotors to come to a stop.
Keep the control cable on the mechanical lock tensioned.
Lift the rotors into the transport position using the single-acting
hydraulic control device on the tractor.
Release the mechanical lock control cable to secure the rotors.
Check that the locks of both lift arms are engaged.
Switch off the tractor and secure it.
Close the ball valve.
Make sure the machine is standing level
Before changing from the transport to the work position (and vice
versa), make sure the machine is standing level. The machine
could tip over, particularly on hillside locations. Damage to the
machine and serious or fatal injury may be caused as a result.
Summary of Contents for VF6585
Page 100: ...EC Conformity Declaration 100 ...
