Safety
16
Road transport
Ensuring road safety
The machine must conform to current national traffic regulations if you
intend to drive with it on public roads. Ensure the following:
•
Lighting, warning and protective equipment must be fitted.
•
The permissible transport widths and weights, axle loads, tyre
load-bearing capacities, laden weights and national speed restric-
tions must be complied with.
•
The maximum permissible road transport speed must be complied
with, but not exceed 50 km/h.
•
Before driving on public roads, fold in all deflector bars and rotors
and secure the machine. All tine supports which have tips that
point at right angles to the direction of travel and which are at a
height of less than 2 metres must be removed or covered.
•
The machine should only be towed by agricultural or forestry
tractors.
The empty weight of the tractor must be greater than the weight of the
machine. The driver and keeper of the vehicle are liable should these
conditions not be observed.
Close the ball valve
Close the ball valve before driving on the road. If the ball valve is open
and there is an operating error, the machine may drop or swing out
unexpectedly. Traffic accidents and accidents with fatal injuries may
be caused as a result.
Check tyre pressures
Check tyre pressure on a regular basis. Incorrect tyre pressures
reduce the service life of a tyre and cause unstable driving character-
istics. Traffic accidents and accidents with fatal injuries may be caused
as a result.
Altered driving and braking performance
Driving and braking characteristics are altered when the machine is
coupled or hitched to the tractor. When cornering, take the overall
width and centrifugal mass of the machine into consideration. Adjust
your driving speed accordingly. A driving style which is not adapted to
conditions can cause accidents. Traffic accidents and accidents with
fatal injuries may be caused as a result.
Summary of Contents for VF6585
Page 100: ...EC Conformity Declaration 100 ...
