32
Operation
Basic settings Page 2
Activating or deactivating:
Symbols
The alarm is triggered, if the speed for the exact output of seed is too
low or too high. The alarm can be deactivated. We recommend that
the alarm is always left switched on.
The type of speed sensor can be set here:
The type of speed sensor can be set here:
Activate or deactivate the alarm, if the speed drops below or exceeds
the setpoint speed
Select type of speed sensor
Select type of start-stop sensor
Activate or deactivate the sensor on the fan
Activate or deactivate the sensor on the metering unit shaft
Activate or deactivate the hopper low level sensor
Activate or deactivate the black/white display No function on Focus 2
Select type of tramline sensor
Activate
= tick in box
Deactivate
= no tick in box
•
Drive wheel
Drive wheel on sowing machine
•
GPS J1939
GPS aerial
•
Manual
Here you can enter a speed which is inde-
pendent of the sensors, e.g. if the speed
sensor is defective but you wish to continue
sowing. You then drive at the entered speed.
•
ISOBUS radar
Radar sensor on the tractor
•
ISOBUS drive
wheel
Speed sensor on the tractor via ISO11783 in-
terface
•
Drive wheel
Drive wheel on sowing machine
•
Track marker
Sensors on the track marker arms
•
Manual
Enter start and stop manually
•
ISO11786 working po-
sition
Sensor via ISO11786 interface
•
ISO11783 working po-
sition
Sensor via ISO11783 interface
