24
Operation
Switch the micrometering system on the metering device On or Off. This
prompt is calculated from the values entered.
Adjust the setting on the metering device. This value is calculated from
the values entered.
Minimum and maximum drive speed in km/h. An alarm is triggered, if
the limits are underachieved or exceeded.
Keys
Several calibration tests can be generated. With the same seed and
the same properties the values of a calibration test already performed
can be used.
N
OTE
However, if, for example, the TKG (thousand grain weight) of the seed
differs, we recommend that a new calibration test be performed.
Back to the information screen.
Go to the previous calibration test.
Go to the next calibration test.
Start the calibration test.
Start the test run.
Accept the calibration test. The values are then accepted as the basis
for the seeding work.
