34
SECTION 6 - SPARE PARTS
Spare parts for Kverneland 600 series machines can be obtained from your Kverneland dealer. For a detailed
list of available parts, refer to the Parts Book held by your dealer.
When ordering spare parts, please give the following information:
1.
Name and Serial Number of machine.
2. Model
Type.
3.
Description of part required.
4.
Quantity of parts required.
5.
Customer’s name and full postal address
The following parts are recommended to be held in stock for maintenance purposes:
Part Description
Part No.
Quantity
PTO shaft shearbolt kit (M8 x 60).
KD1560951
1
Circular auger blades
KD1560635
20
(Refer to parts book or dealer for more part numbers)
SAFETY FIRST!
Before dismantling the machine in order to replace worn or damaged
parts, ALWAYS ensure that the following procedures are obeyed:
a) Machine is uncoupled from tractor and securely supported on firm, level ground.
b) Ensure that machine is stable.
c) A clearly visible notice is placed on the machine, stating it is NOT to be used.
d) Any bystanders are suitably warned and protected against injury.
e) Suitable protective clothing MUST be worn AT ALL TIMES.
SAFETY FIRST!
When re-assembling the machine, ALWAYS ensure that the following steps
are obeyed:
a) ALL tools are removed from the machine and surrounding area and put in a safe place.
b) ALL guards are replaced and bolts securely re-tightened.
c) Any bystanders are suitably warned and protected against injury.
After re-assembling the machine, engage the PTO at low revs. and check for satisfactory operation. Listen for
any unusual noises and excessive vibrations.
If any dismantled parts are fit for re-use, thoroughly clean and lubricate them and store in a clean, dry place.