20
7. For subsequent installations, simply connect the PTO shaft between the tractor and the machine, and
connect the safety chains to prevent the guards from rotating.
NOTE!
Disengage PTO shaft when turning.
8. Before operating the machine, check that the PTO shaft does not:
Foul the tractor PTO guard when the machine is turned
Foul the tractor three-point linkage when machine is turned.
9. When uncoupling machine from tractor, ALWAYS rest the PTO on the support device provided:
(i)
Horizontal drawbar
- support strut on drawbar.
(ii) Raised drawbar
- chain suspended from mounting bracket.
NOTE!
Check that the PTO shaft satisfies the preceding conditions on ALL tractors that may be used to drive
your 600 series Diet Feeder.
A wide angle PTO shaft is available as an option to allow greater manoeuvrability.
Please refer to your dealer for details.
IMPORTANT!
On new machines fitted with on-board hydraulic pump option check before engaging P.T.O.
drive ensure that the oil tank STOP VALVE is OPEN. If closed possible damage to the hydraulic pump may
occur. The valve is situated at the bottom of the oil tank (in the large oil feed hose) and can be accessed by
opening the left-hand panel at the front of the machine.
