www.kvarta.net
32
/
36
32
RDS300/RDS500/RDS1000 User Manual 3.10
C.5.
EON COMMANDS*
To use EON make sure that correct EON List is defined. Group 14A and 14B are added to the group
sequence. EON is enabled for the PSNs in the list, as well as the EON_ENABLE flags are set correctly.
EON AFs should also be configured. Here are the commands regarding Enhanced Other Network
Communication.
DSN(n).LIST? – Display PSN List.
*
– Indicates EON enabled for the psn.
DSN(n).LIST=a,b,c,d,... Create Data Set with Main PSN - a, EON PSNs – b,c,d,…
DSN(d).PSN(p).EON={1|0} Enable(1)/Disable(0) EON's in DSN d and PSN p
DSN(d).PSN(p).EON_ELEMENTS=XX Set EON elements Enable/Disable(Hex) (for DSN d, PSN p)
EONTA.CONTROL=a,b,c – a:
Minimum number of other groups between two type 14B groups (0..8),b:
Number of type 14B groups at TA "On" transition, c: Number of type 14B groups at TA "Off"
transition.
* Only RDS1000
C.6.
ODA COMMANDS*
Make sure to define AID and add at least one short message. Groups 3A and the group for the ODA in
the group sequence should also be added.
ODA? – Lists all configured ODA Information
SEQ3A=<U1,U2,…U16> - Un defines the type of group used by the ODA application, U1, U2,…Un= 3A
(specific case), 3B, 4B, 5A,5B, 6A, 6B, 7A, 7B, 8A, 8B, 9A, 9B, 10B, 11A, 11B, 12A, 12B, 13A, 13B. IF
empty sequence defined, the encoder uses sequence containing all ODA application groups. DSN(d)
may go before this command.
ODA.gv.AID=xxxx Set AID (x=0-9, A-F)
ODA.gv.MSG=xxxx Set MSG (x=0-9, A-F)
ODA.gv.MSG2=xxxx Set MSG2 (x=0-9, A-F)
ODA.gv.TO=n Set TO (n=0-255)
ODA.gv.REPEAT=n Set REPEAT (n=0-15)
ODA.gv.SPACE=n Set SPACE (n=0-15)
ODA.gv.NB=n Set NB (n=1-60)
ODA.gv.WINDOW=n Set WINDOW (n=0-60)
ODA.gv.DELAY=n Set DELAY (n=1-59)
ODA.RPGS=g1,g2,. Set relative priority
* Only RDS1000
C.7.
CLOCK COMMANDS
Clock configuration and monitoring commands:
CT=1|0 : Enable/Disable Transmission of 4A group on each minute.
CT? : Display CT information
CT_SET=dd/mm/YYYY hh:mm:ss +offset :UTC Date and time and offset in 30 minute units(-24 to +24).
CT_SET? : Displays current date and time.