www.kvarta.net
30
/
36
30
RDS300/RDS500/RDS1000 User Manual 3.10
C.3.
DSN AND PSN CONFIGURATION
RDS? : Lists configured information regarding currently configured DSN and PSN. Following are
commands for initialization and configuration of the “fixed” parameters of the RDS data:
RDS=0|1: Disable/Enable RDS Data Generation
DSN_CURRENT=D : Select Data Set 'D' as the current Data Set to broadcast. D=1-8
DSN=D : Select Data Set 'D' for configuration. D=0-8. If DSN=0 : select the current DSN
PSN=P : Set PSN 'P' for PSN configuration PSN (P=1-8 for each DSN d).
NOTE:
Each DSN has its’ own
separate PSN buffers (P=1-8)
RDS? : Display PSN config for DSN D, PSN P
DSN(d).PSN(p). - may go before next PSN commands
PI=XXXX Set PI (for DSN d, PSN p)
PS=XXXXXXXX Set PS (for DSN d, PSN p)
PIN=XXXX Set PIN (Hexadecimal) for DSN d, PSN P)
DI=i Set DI (for DSN d, PSN p) i=0-15
TP=i Set TP (for DSN d, PSN p) i=0-1
TA=i Set TA (for DSN d, PSN p) i=0-1
MS=i Set MS (for DSN d, PSN p) i=0-1
PTY=i Set PTY (for DSN d, PSN p) i=0-31
PTYN=XXXXXXXX Set PTYN (for DSN d, PSN p) (not Main)
LINK=XXXX Set LINK (Hexadecimal) for DSN d, PSN p)
AF=a,b,c,d.... Enter/Read AF values (or codes) for DSN d,PSN p) .
NOTE:
For example to input 100MHz you must write
100.0
. The input format is
XXX.X
(from 87.6 to
107.9) followed by a coma for the next AF. LF/MF frequencies input format is
XXX
or
XXXX
(from 153
kHz to 1602 kHz for more information on available frequencies read EN50067). We recommend
reading AF setting (with the command
AF?)
after configuration for error correction.
AF_CODE= a(1), a(2), ..a(n) Enter/Read AF codes (for DSN d,PSN p) . Values a(1), a(2), ..a(n) :
a(1)=224 to 249 (defines the AF number in a list: 224=0 Alternative Frequency, 225=1 AF,…249=25
AF) a(2),a(3),..=1 to 204 (encoding of the FM frequencies from 87.6 to 107.9) 250 for encoding the
AFs in the AM bands) a(n-1)=205 fill value for lists having an even number of Afs a(n)= 0 (end of AF
list). To see configured AF codes use the command
AF_CODE?
GS=a, b, c, d….. Set Group Sequence (for DSN d)
RT=<text> Set Radio Text (for DSN d)
TA.CONTROL=a,b,c – a:
Minimum number of other groups between two type 15B groups (0..8),b:
Number of type 15B groups at TA "On" transition, c: Number of type 15B groups at TA "Off"
transition.
