www.kvarta.net
35
/
36
35
RDS300/RDS500/RDS1000 User Manual 3.10
MODE=0|1|2; 0: unidirectional, 1: bidirectional with request, 2: bidirectional
SPEED? – Displays communication speed (NOTE: Only for COM ports)
SPEED=[9600],[19200].. [115200] – Set com port speed
ECHO? – Displays communication echo status.
ECHO=1|0 - Set communication echo ON or OFF
SQC? – Displays sequence counter table.
ACCESS? – Displays MEC access table.
ACCESS.ALL=0|1 - Set RDS Encoder access right (ALL MEC)
ACCESS.<MEC>=0|1 - Set RDS Encoder access right (<MEC>=0-255)
NOTE:
The following commands are only available for TCP ports.
TCP1.TYPE=TCP – Set TCP or UDP communication
TCP1.PORT=X – Set TCP/UDP port
TCP1.FILTER=0.0.0.0 – Set IP filter for the port.
TCP1.TCP_STATUS=ESTABLISHED – Display TCP status of the specified port.
* RDS300 has only 1 TCP/UDP port; RDS500 – 2 ports; RDS1000 – 4ports;
C.12.
RT+ COMMANDS*
RT_PLUS={0|1} - RT Plus On-1/OFF-0
RT_PLUS_GROUP - RT Plus Group 5A, 6A, 7A, 8A, 9A, 11A, 12A or 13A
NOTE:
To enable the RT+ you have to set the values of the used tags in the RT_TAGGED_TEXT or in
the RT list of tagged strings. You have to also add the RT+ group to the group sequence as well as
group 3A.
*Only RDS500 and RDS1000
C.13.
MONITORING COMMANDS*
MONITORING – Displays monitoring commands
START_MONITORING –Starts monitoring of raw data on current port
STOP_MONITORING –Stop monitoring of raw data
MONITORING? – Displays current port for monitoring and the monitoring type(0-OFF)
MONITORING=x1,x2 - x1 is the port number(0-COM1,2-TCP1,3-TCP2,etc.),x2 is the monitoring status
CURRENT_PS? – Displays currently broadcasted PS
CURRENT_RT? – Displays currently broadcasted RT
