Kval 990-H, Service Manual

Page: 68 / 104

Replacing Tooling in the Front Section
3-29
KVAL 990-H Service Manual
.
5.
Move the Six-Shooter assembly away from the machine-it will move about 1½ inch.
This provides room for hands to access the screwdriver bit holders.
6.
To remove screwdriver bit, push the bit holder (see images) back toward the Six-
Shooter assembly and hold: pull bit out of holder.
Slide Back
Bit Holder
7.
To insert screwdriver bit, push bit holder back toward Six-Shooter assembly and
hold while inserting new bit. Release holder to secure bit.
8.
Move Six-Shooter assembly back toward machine and pull the back slide toward
you; then move assembly away from machine to restore assembly to original start-
ing position