Kval 558, Operation Manual

Page: 28 / 68

Operator’s Tour
2-4
KVAL 558 Operation Manual
Machine Eyes
The machine eyes track the door through the cutting process.
Door Sense Eye
Before Wheel # 3
(I-0016)
Door Sense Eye
Before Wheel # 1
(I-0013)
Door Sense Eye
Before Wheel # 2
(I-0015)
Mid-Machine Eye
Before Wheel # 2
(I-0014)
FIGURE 2-5.
Location of Mid Machine Eyes
TABLE 2.
Description of Machine Eyes
Location Call-Out Number Description
Before Wheel 1 I-0013 Push over control when activated.
Before Wheel 2 I-0014 Stops door before cutter.
Before Wheel 2 I-0015 Brings Wheel # 2 down to secure door when blocked,
wheel goes up when clear.
Before Wheel 3 I-0016 Brings Wheel # 3 down to secure door when blocked,
wheel goes up when clear.