Kustom Signals Pro-Lite, Reference Manual

Page: 10 / 50

Pro-Lite Operator’s Manual
Page 4
CONTROL LOCATIONS
NOTE: This manual describes both the single-shot
HUD version and the tracking history HUD
version. Please refer to the descriptions of
the optical sight to better understand the
model you have purchased.
Operation of the Pro-Lite primarily involves using the
integrated LCD located on the back panel of the unit and
the four pushbutton switches located on the top of the
unit. Figure 1 illustrates the unit’s features and the
external controls that are used to operate the instrument.
These controls and features are briefly described below:
A.
Liquid Crystal Display (LCD)
: Window displays speed,
range, command menus, error messages and unit status in
a text format.
B.
Fire/On/Enter:
Fire - Activates the range/speed
measurement function, locks and releases speed and
range displays. On - turns on primary power. Enter -
activates the text Menu item selected on the LCD.
C.
TEST/
▼
ARROW
:
Dual function pushbutton switch. Test –
Activates the test mode where the unit runs an internal
self-test routine. Down ARROW permits the user to
navigate within the Menu items appearing on the LCD.
D
.
MODE/
▲
ARROW:
Dual function pushbutton switch.
Mode - Enables the user to select the speed measuring
mode or range measuring. Up ARROW enables the user to
navigate within the Menu items on the LCD.
E.
MENU/ESC:
displays the unit’s programmed text Menu
items on the LCD. ESC permits the user to exit the
Menu and return to the speed or range-operating
mode.
F.
Aiming sight
: displays the sighting reticle and, with the
Optional display, the speed or range of a target in a HUD
(Heads-Up-Display).
G.
I/O Connector
: contains conductors for the external
signal output and optional RS-232 port (UART).