Kustom Signals Pro-Lite Reference Manual Download Page 22 | Manualshive

Page: 22 / 50

background image

Pro-Lite Operator’s Manual

Page 16

Mode/option selection

Mode/

▲

Arrow

The Mode/Arrow pushbutton switch is used to toggle

between Speed and Range Mode. The default is Speed
Mode. To select this option, no action is required.

NOTE: It is not necessary to press the ENTER push

button to select speed or ranging mode

Pressing the Mode switch erases SPEED, leaving only

the RANGE text displayed. The unit is now in the range-
only mode. This also changes the display in the HUD from
SPEED to RANGE. The ARROW segment of the push
button becomes functional when an operator Menu item is
selected as outlined in the MENU/ESC pushbutton switch
description. To return to the speed mode, press the MODE
switch again. Both Speed and Range display again on the
LCD, and the HUD displays speed measurements.

MENU/ESC

The MENU display is used to provide access to set-up

and operating features of the Pro-Lite. Enter this mode
after the unit has been powered up and completed self-test.
Using the MENU pushbutton switch enables the operator
to refine the set-up for a particular situation. Pressing this
switch once displays the following screen:

Press ENTER to accept your selection.

MENU

DISTANCE LIMITS

«
...
20
21
22
23
24
...
»

Summary of Contents for Pro-Lite



















































Reviews:

No comments

Related manuals for Pro-Lite

airFiber AF-5XHD

Brand: Ubiquiti Pages: 32

Brand: oticon Pages: 2

Brand: Sonoro Pages: 136

Brand: Renkforce Pages: 8

Brand: Vertex Standard Pages: 63

Brand: Pioneer Pages: 16

Brand: Pioneer Pages: 40

Brand: Pioneer Pages: 103

GEXINNO1 - Inno 1 GB XM Radio Tuner

Brand: Pioneer Pages: 47

Brand: Pioneer Pages: 110

Brand: ROAD KING Pages: 18

Brand: Wurlitzer Pages: 26

Brand: Volvo Pages: 12

Brand: Roberts Pages: 52

Brand: Abell Pages: 41

Brand: Abell Pages: 50

Brand: trig Pages: 28

Brand: 4RF Pages: 72

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands