®
®
04
GENERAL SPECIFICATIONS :
Display :
3-5/6 digits 6000 counts, dual display.
Polarity :
Automatic
Jaw opening & Conductor diameter :
30mm max
Update Rate :
5 per second nominal
Operating Temperature :
0ºC to 40ºC
Relative Humidity :
Maximum relative humidity 80% for
temperature up to 31ºC decreasing
linearly to 50% relative humidity at 40ºC
Pollution degree :
2
Storage Temperature :
-20ºC to 60ºC, < 80% R.H.
(with battery removed)
Altitude :
Operating below 2000m
Temperature Coefficient :
Nominal 0.15 × (specified accuracy)/ºC
@(0ºC—18ºC or 28ºC—40ºC), or
otherwise specified
Sensing :
True RMS
Low Battery :
Below approx. 2.85V for Capacitance
& Hz, Below approx. 2.5V for other
functions
APO Timing :
Idle for 32 minutes approx.
Power Consumption :
6.2mA Typical.
APO Consumption :
5
m
A typical
Power Supply :
1.5V AAA Size battery X 2
Dimension :
217(L) x 76(W) x 37(H)mm
Weight :
Approx. 186gm.
V. SPECIFICATIONS :
19
P-RMS
Press
button for one second or more to toggle the
PEAK-RMS
mode. It captures RMS values of inrush current in
duration as short as 80ms. LCD annuciator “
P-RMS
” turns on.
Auto-Power-Off is disabled automatically in this mode.
Hold feature freezes the display for later view. LCD “ ” turns on.
Press the
HOLD
button momentarily to toggle the
hold feature.
The Complementary Beeper feature can be selected in Power-up
option. Press and hold the / button while turning the meter on
to enable. When the LCD segments indicate a clockwise
movement, the beeper sounds a single long beep per segment
cycle. When the segments indicate a counter clockwise movement,
the beeper sounds 3 short beeps per segment cycle.
Using the Complementary Beeper feature:
Hold feature
H
80ms PEAK-RMS mode for Clamp-on ACA functions
Press the
SELECT
button for 1 second or more to toggle the LCD
backlight on/off. The backlight will also be turned off automatically
after 20 minutes to extend battery life.
LCD display Backlight
Intelligent Auto-Power Off (APO)
The Auto-Power-off (APO) mode turns the meter off automatically
to extend battery life after approximately 32 minutes of no
specified activities, where applicable:
1) Rotary switch or push button operations
2) Significant measuring readings of above 8.5% of ranges
3) Non-OL readings for Resistance, Continuity or Diode function
4) Non-zero readings for Hz function
5) Significant movement indication as in Phase Rotation functions
