®
®
I. SAFETY :
This manual contains information and warnings that must be
followed for operating the instrument safely and maintaining the
instrument in a safe operating condition. If the instrument is used in
manner not specified by the manufacturer, the protection provided
by the instrument may be impaired.
Terms in this manual :
WARNING
Identifies conditions and actions that could result in
serious injury or even death to the user.
CAUTION
Identifies conditions and actions that could cause
damage or malfunction in the instrument.
01
22
MUMBAI
TEST CERTIFICATE
AC TRMS DIGITAL CLAMPMETER
This Test Certificate warrantees that the product has been
inspected and tested in accordance with the published
specifications.
The instrument has been calibrated by using equipment
which has already been calibrated to standards traceable
to national standards.
MODEL NO. ________________
KM 175D
SERIAL NO. ___________
DATE: ___________
ISO 9001
REGISTERED
QC
PASS
KUSAM-MECO
WARNING :
To reduce the risk of fire or electric shock, do not expose this product
to rain or moisture. The meter is intended only for indoor use.
Keep your hands/fingers behind the hand/finger barriers (of the meter
and the test leads) that indicate the limits of safe access of the hand-
held part during measurement. Inspect test leads, connectors and
probes for damaged insulation or exposed metal before using the
instrument. If any defects are found, replace them immediately. Only
use the test lead provided with the meter or UL Listed Probe
Assembly to the same meter ratings or better.
IEC 61010-031 requires exposed conductive test probe tips to be
< 4mm for CAT III & CAT IV ratings. Refer to the category markings
on your probe assemblies as well as on the add-on accessories
(like detachable Caps or Alligator Clips), if any, for applicable
rating changes.
Observe proper safety precautions when working with voltages
above 33 Vrms, 46.7Vpeak or 70 VDC. These voltage levels pose
a potential shock hazard to the user. Before and after hazardous
voltage measurements, check the voltage function on a known
source such as line voltage to determine proper meter functioning.
