background image

 

Kurzweil PC2 Musician’s Guide

 

Contents

 

viii

 

Editing the Internal Setup..................................................................................................................................... 4-27

Using the Arpeggiator .................................................................................................................................................. 4-27

Using Pressure (Aftertouch) as an Arpeggiator Controller ............................................................................. 4-29
Using the Arpeggiator with a Sequencer or External Controller.................................................................... 4-29

Using the PC2 to Control External Slaves ................................................................................................................. 4-30

Sending Bank-Select and Program-Change Messages ..................................................................................... 4-30
Understanding Bank-Select Controllers ............................................................................................................. 4-30
Sending Program Changes Only ......................................................................................................................... 4-32
Preventing Program Changes on Slaves............................................................................................................. 4-33

Working With an External Sequencer ........................................................................................................................ 4-33

Turn Local Control Off! ......................................................................................................................................... 4-33

Global Method................................................................................................................................................. 4-33
Setup Method .................................................................................................................................................. 4-33

Recording to a Sequencer While in MIDI Setups Mode................................................................................... 4-34

Troubleshooting............................................................................................................................................................. 4-34

 

Chapter 5

Descriptions of Parameters

 

Program Editor Parameters ........................................................................................................................................... 5-1

The Timbre Menu..................................................................................................................................................... 5-1
The Envelope Menu................................................................................................................................................. 5-3
The LFO Menu.......................................................................................................................................................... 5-3
The LFO Menu: Rotor Effects Parameters ............................................................................................................ 5-4

Setup Editor Parameters................................................................................................................................................. 5-5

The MIDI Xmit Menu .............................................................................................................................................. 5-5
The Program Menu .................................................................................................................................................. 5-6
The Key Range Menu .............................................................................................................................................. 5-9
The Transpose Menu ............................................................................................................................................. 5-10
The Velocity Menu ................................................................................................................................................. 5-10
The Controllers Menu............................................................................................................................................ 5-14
The Controllers Menu: Continuous Controller Parameters............................................................................. 5-15
The Controllers Menu: Ribbon Controller Parameters..................................................................................... 5-16
The Controllers Menu: Switch Controller Parameters ..................................................................................... 5-17

Switch-Button Priority ................................................................................................................................... 5-18

The Arpeggiator Menu.......................................................................................................................................... 5-19

Effects Editor Parameters ............................................................................................................................................. 5-24
KB3 Editor Parameters ................................................................................................................................................. 5-27

The Timbre Menu................................................................................................................................................... 5-27
The Envelope Menu............................................................................................................................................... 5-28
The Envelope Menu: Percussion Parameters..................................................................................................... 5-29
Envelope Menu: Percussion Pitch Parameters .................................................................................................. 5-30
The LFO Menu........................................................................................................................................................ 5-30

System Parameters ........................................................................................................................................................ 5-30

The Global Menu.................................................................................................................................................... 5-30
The MIDI Recv Menu ............................................................................................................................................ 5-36

 

Appendix A Maintenance and Upgrades

 

Replacing the Battery..................................................................................................................................................... A-1

Before you Begin ..................................................................................................................................................... A-1
Opening your PC2 .................................................................................................................................................. A-1
Installing the Battery .............................................................................................................................................. A-1

Summary of Contents for PC2 - MUSICIANS GUIDE REV A











































































































































































Reviews: