5-6
Descriptions of Parameters
Setup Editor Parameters
information only to the PC2. If youÕre using the PC2 to control other instruments or to record to
an external sequencer, use a value of
MIDI
or
Local+MIDI
.
Bend Range, Semitones (BndRng ST)
Sets the number of semitones of pitch bend applied by any physical controller that sends either
the Pitch Up, Pitch Down, Pitch, or Rvrs Pitch MIDI Controller message, when that controller is
at its maximum (sending a value of 127). In the default setup, the Pitch Wheel controls pitch
bending.
The value of this parameter gets added to the value of BndRng ct. You can think of BndRng ST
as a coarse adjustment, and BndRng ct as a Þne adjustment. For example, if you want the
maximum amount of pitch bend to be slightly more than a whole note, set BndRng ST to
2
, and
BndRng ct to a relatively low number like
10
.
In the default setup, BndRng ST is
2
, and BndRng ct is
0
, so pushing the Pitch Wheel all the way
up bends the pitch two semitones up, and pulling it all the way down bends the pitch two
semitones down.
Bend Range, Cents (BndRng ct)
Sets the number of cents (100ths of a semitone) of pitch bend applied by any physical controller
that sends either the Pitch Up, Pitch Down, Pitch, or Rvrs Pitch MIDI Controller message, when
that controller is at its maximum. The value of this parameter gets added to the value of BndRng
ST. In the default setup, BndRng ct is
0
.
Auxiliary Bend 1, Up (AuxBnd1 Up)
Sets the number of semitones of upward pitch bend applied by any physical controller that
sends AuxBnd1 (MIDI 21), when that controller is at its maximum. In the default setup and the
internal setup, the ribbon controller is set to send AuxBnd1.
Auxiliary Bend 1, Down (AuxBnd1 Dwn)
Sets the number of semitones of downward pitch bend applied by any physical controller that
sends AuxBnd1 (MIDI 21), when that controller is at its maximum. In the default setup, the
ribbon controller is set to send AuxBnd1.
Auxiliary Bend 2 Range (AuxBnd2 Rng)
Sets the number of semitones of pitch bend applied by any physical controller that sends
AuxBnd2 (MIDI 15), when that controller is at its maximum. In the default setup, there arenÕt
any controllers set to send AuxBnd2.
The Program Menu
Bank
When you select this parameter, the top line of the display shows the current zone of the setup
youÕre editing, as well as the bank ID and program ID of the program assigned to the zone. The
bottom line shows the ID and name of the bank that the current zone uses.
