background image

Installation and Operation Manual

STI Wireless Driveway Monitor

TM

STI-30104
LAMP
CONTROLLER
(OPTIONAL)

INDOOR RECEIVER

AC ADAPTER

RECEIVER ANTENNA

BUTTON

SOLAR SENSOR

CAP

WALL MOUNT

TUBE

STAKE

Thank you for purchasing this fine product. We want you to know that your satisfaction
is very important to us.  We suggest you take the time to read this manual carefully
to get the most from your new product.

HOW THE PRODUCT WORKS

Because of its patented magnetometer SENSOR system, the Driveway Monitor will
only be triggered by cars or trucks — not people, animals and so forth.  When a vehicle
passes the SENSOR next to the driveway, the RECEIVER unit inside the office or home
sounds a chime and flashes the alert light.  The alert light will continue to flash for 15
minutes and the RECEIVER will chime each time a vehicle passes. The earth has a
uniform magnetic field around it. A vehicle creates a slight disturbance in the earths
field. The SENSOR detects this disturbance and transmits a signal to the RECEIVER.

BEFORE YOU START…

Refer to this drawing to become familiar with all the parts.

Models:

STI-30100 - Solar Power
STI-30150 - Battery Power

BATTERY SENSOR

CAP

WALL MOUNT

TUBE

STAKE

RED LED

SPEAKER 

GREEN LED

75 mA OUTPUT

Summary of Contents for Wireless Driveway Monitor STI-30100







Reviews: