background image

E09200108175

Thank you for selecting a MITSUBISHI MOTORS product as your
new vehicle.
This owner’s manual will add to your understanding and full enjoy-
ment of the many fine features of this vehicle.
It contains information prepared to acquaint you with the proper way
to operate and maintain your vehicle for the utmost in driving pleasure.

MITSUBISHI MOTORS CORPORATION reserves the right to make
changes in design and specifications and/or to make additions to or
improvements in this product without obligation to install them on
products previously manufactured.
It is an absolute requirement for the driver to strictly observe all laws
and regulations concerning vehicles.

This owner’s manual has been written in compliance with such laws
and regulations, but some of the contents may become contradictory
with later amendment of the laws and regulations.
If your vehicle is equipped with any locally produced part, the operat-
ing procedure, specifications, maintenance intervals and other contents
found in this owner’s manual may not sometimes apply to it.

Please leave this owner’s manual in this vehicle at time of resale. The
next owner will appreciate having access to the information contained
in this owner’s manual.

Foreword

Throughout this owner’s manual the words 

WARNING

 and

CAUTION

appear. These serve as reminders to be especially care-

ful. Failure to follow instructions could result in personal injury or
damage to your vehicle.

Indicates a strong possibility of severe personal injury or death if
instructions are not followed.

Means hazards or unsafe practices that could cause minor per-
sonal injury or damage to your vehicle.

You will see another important symbol:

Gives helpful information.

*: Indicates optional equipment.

It may differ according to the sales classification; refer to
the sales catalogue.

Abbreviations used in this owner’s manual:

M/T: Manual Transmission
A/T: Automatic Transmission

The symbol used on the vehicles:

: See owner’s manual

©2019 Mitsubishi Motors Corporation

Summary of Contents for PAJERO SPORT

































































































































































































































































































































































































































Reviews: