background image

Studio Configuration Files

12

              

Studio Configuration Files

For your convenience, a con

fi

guration 

fi

le named MLAN01.KSP is provided with your mLAN option. This 

fi

le is also provided as MLAN01.MID which you can load into your KSP8 as a SysEx dump. This 

fi

le 

contains a subset of the base KSP8 studios with the appropriate input selections made; the KSP 

fi

le also 

sets the Master Table Clock Source parameter to mLAN. Additionally, the con

fi

guration 

fi

le includes 

several useful studios created especially for mLAN users. 

Loading the Studio Configuration Files

For your convenience, we have provided the studio con

fi

guration 

fi

les in two formats: KSP and MID. 

Before loading either type of 

fi

le, however, you should backup any objects you’ve created on your KSP8.

MLAN01.KSP

To load the KSP 

fi

le, copy it from the disk to a SmartMedia card, then insert the SmartMedia card (gold 

side down) into the KSP8. Press the 

MASTER

 soft button, followed by 

CARD

, then

 Load

. You will now be 

able to load the con

fi

guration 

fi

le. (Note that you can place the studios into any bank of your choosing. See 

the 

KSP8 User’s Guide

 for more information on loading and arranging objects.)

MLAN01.MID

Important: 

Do not use the KSP8 while you are loading the MIDI 

fi

le to it. When the MIDI light stops 

fl

ashing the studios will be available and you can again use the KSP8.

To use the MID 

fi

le instead of the KSP 

fi

le, make sure the KSP8 is turned on, then “play” the MID 

fi

le on a 

sequencer that has its MIDI OUT connected to the KSP8’s MIDI IN. The 

fi

le will load into the KSP8 

automatically, and the MIDI LED on the front panel of the KSP8 will 

fl

ash while it is receiving MIDI. 

Listed below are the objects provided with MLAN01.KSP and MLAN01.MID:

38      Master (MLAN01.KSP only)
800     mLan Overdub
801     mLan Overdub 1+2
802     mLAN 6FX&Monitor
803     mLAN StDrms>8Out
804     mLAN Mn Vox>8Out
805     4SterIn>4SterFX
806     4MonoIn>4SterFX
807     8MonoIn>8MonoFX
808     4StIn>4StFX->Mix
809     4MnIn>4StFX->Mix
810     8MnIn>8MnFX->Mix
811     Morph This
812     6 MonoIn>5.1 FX+
813     8 MonoIn>5.1 FX
814     MnIn>5.1 AutoPan
815     3 SterIn>5.1 FX+
816     4 SterIn>5.1 FX
817     5.1 In>5.1 FX +
818     Default 5.1+Ster
819     Default 8 Mono
820     Default 4 Stereo

Summary of Contents for KMLN8

















Reviews: