Installation
3
3. Slide the I/O option board into the option slot as shown in Figure 2. Make sure the side edges of
the board slide into the plastic rails inside the option slot.
Figure 2. Inserting option board into KSP8 (Analog I/O Option pictured).
4. Slide the board all the way into the KSP8, making sure that it becomes securely seated in the
connector at the back of the opening.
5. Attach the board to the KSP8 using the screws that originally held the option slot cover plate in
place. Figure 2 shows the location for these screws.
6. To con
fi
rm that the installation has been successful, turn the KSP8 on, then refer to the option’s
usage section below.
plastic rail
