Kurabo QuickGene-Auto12S, Operation Manual

Page: 15 / 50

1 Installation Procedures
1
QuickGene-Auto12S/QuickGene-Auto24S Operation Manual
1
1 Installation Procedures
The installation procedures for this device are explained below.
1.1 Conditions for Installation, Operating Environment
The conditions for system installation and the operating environment are explained here.
■ Installation location
・
To avoid the risk of electric shock, this equipment must only be connected to a
supply mains with protective earth.
-
Install QuickGene-Auto12S / QuickGene-Auto24S on a clean, dry, sturdy
surface within 1.2 M of an electrical outlet, and clearance around the
instrument base at all times to ensure proper ventilation.
-
Do not install this device in a location with intense vibration or at an unstable
incline. This may cause injury or failure.
-
Do not install this device in a location exposed to direct sunlight or in the
proximity of a heating or cooling appliance. This may cause a shortened
lifetime or failure. (Block the sunlight by closing curtains or blinds as
necessary).
-
Install QuickGene-Auto12S / QuickGene-Auto24S on a location which is
well-ventilated and not dusty.
-
Install QuickGene-Auto12S / QuickGene-Auto24S on a location with
minimal sudden temperature fluctuation (Warming a cold room suddenly or
moving the device from a room with low temperature to a warm room may
cause condensation inside the device, resulting in sub-standard performance.)
-
Install QuickGene-Auto12S / QuickGene-Auto24S on a location where the
temperature and humidity are kept within the specified range (far from water
faucets, water heaters, humidifiers, air-conditioners and heaters)
-
Do not install QuickGene-Auto12S / QuickGene-Auto24S on a location
where strong magnetism (motors, transformers, televisions, speakers, magnets,
etc.) is in proximity (Approaching a magnetic source will cause malfunction.)
Warning
: