Kurabo ADS Biotec QuickGene-Mini8L, Operation Manual

Page: 66 / 78

3 Maintenance
30
QuickGene-Mini8L Operation Manual
3.4 How to replace the Pressure Heads
(1) First, take out the Pressure Adapter (P.28-29).
(2) Lying the QuickGene-Mini8L face up as shown and
then rotate the Rotary Switch to eject the Pressure
Heads.
Note: Before lying the device face up, spread a
cloth, etc. on the table to avoid damaging the body.
3
(3) While holding the QuickGene-Mini8L by one hand,
remove the Pressure Heads.
(4) While holding the QuickGene-Mini8L by one hand,
insert new Pressure Heads.
Note: Set the Pressure Heads in the direction shown
in the figure, and push them completely into the
body.
(5) Rotate the Rotary Switch to retract the Pressure
Heads.
(6) Install the
Pressure Adapter into the device
(Step.6
→
p. 28).