Part 1 - INSTALLATION INSTRUCTIONS
4.3 - Installation of the chimney A
No matter which type of installation is being used, any wooden shelves in the area
where the hood is to be fitted must first be removed, drilled and later replaced.
1 - Drilling the shelves:
a) Using the cardboard template provided,
and taking hole “
B
” as a point of
reference, drill the shelves along the
central axis to allow the passage of the
chimney. The chimney must be inserted
into the shelves before it is fixed to the
hood canopy
C
(
fig. 12
).
b) When installing the ducting version with
the air outlet directed upwards, if the
ducting fan unit is positioned below the
line of shelves it will be necessary to
drill a suitable hole in the top shelf only,
to allow the air ducting pipe to pass
through (
fig. 13
).
2 - Direction and position of the ducting
fan unit
a) The hood is normally supplied with the
air towards the wall installed with the to
the right or left be necessary to change of the ducting fan
proceeding as follows:
- Unscrew the screws
- Turn the ducting the right or
left;
- Replace the screws
U
.
b) The ducting fan unit air
outlets must be arranged
according to the type of
installation to be carried out.
· Air outlet directed upwards (fig. 2a-b).
- Remove the plastic plug from the upper part of the venting
grill and replace it on the rear part (
fig. 15
).
· Air outlet directed towards the wall (fig. 3).
- Remove the plastic frame from the air outlet (
fig. 16
).
A08_12
1 2
1 2
1 3
1 3
1 4
1 4
1 5
1 5
1 6
1 6
Summary of Contents for KD 674.1 GE
Page 2: ......
Page 68: ...4329309 07 000727 ...
