19
Part 1 - INSTALLATION INSTRUCTIONS
3 - Fitting the hood canopy C to the wall
a) Remove the metal grease filters and the
activated charcoal filter, if there is any (see
the paragraph on Maintenance).
b) Fit the support rod
B
using the two screws
K
(3,5x9,5) provided (
fig. 8
).
c) Hook the hood canopy
C
to the eye bolts
O
fixed in holes
1
(
fig. 9
).
d) Adjust the support rod
B
so that it pushes
against the wall (
fig. 10
).
e) Adjusting position (
fig. 11
). There are two adjustable hooks at the rear of the hood,
which can be used to adjust its position as follows:
- Turn the screws
L
until the position of screws
N
coincides with the lower access
holes.
- Turn the screws
N
to adjust the vertical and horizontal position of the hood.
- Lock the screws
L
to fasten the hood against the wall.
- Insert the plugs
T
provided in the holes giving access to screws
N
.
8
8
9
9
1 1
1 1
B
A08_10
1 0
1 0
Summary of Contents for KD 674.1 GE
Page 2: ......
Page 68: ...4329309 07 000727 ...
