EEH 6350.0
29
What to do if trouble occurs...
[
Repairs may only be carried out by a qualified technician!
You can deal with some problems that occur yourself. First check whether
there has been any operating error. Repairs during the guarantee period are
not free of charge, when they are caused by operating errors or non-observ-
ance of the following instructions:
Replacing the oven lamp
[
Caution: Danger of electric shock! Before you open the cover of the oven
lamp the appliance has to be disconnected from the electricity supply:
Switch off the fuse!
[
The lamps become very hot after being in use for some time. Therefore,
the lamps should be changed when they have cooled down!
Type: 25 W, 230/240 V, socket: E14
Important:
temperature resistant up to 300 °C!
You can obtain these lamps from KÜPPERSBUSCH customer service or from
your dealer.
Changing the light bulb:
– Unscrew the shelf rack.
– Carefully lever out the glass
cover with a screwdriver.
– Remove the damaged light
bulb and put the new one in.
– Reinstall the glass cover.
Replacing the door sealing
[
Do not use the oven with damaged or missing door sealing!
If the sealing is damaged or cannot be cleaned anymore it has to be replaced.
You can obtain a new sealing from KÜPPERSBUSCH customer service.
Removing the sealing
– To remove the sealing gently pull
each corner out.
Fitting the new sealing
– Clasp one corner after the other into the oven front.
Take care not to deform the hooks!
Rating label
Always indicate the data provided on the rating label when calling in customer
service or ordering spare parts.
The rating label for the oven is located on the
right-hand side strip and is visible when the
oven door is open.
– Make a note of this information in case you
have to consult our customer service.
You will find the rating label for the hob on the front page of the cooking sur-
face assembly instructions.
Fault
Cause
Remedy
Heat indicator of a coo-
king zone does not
work.
Lighting defective.
Call customer service.
[
Risk of burning, as the-
re is no temperature
warning.
Not possible to switch
off hob or oven.
Electronic component defecti-
ve.
Disconnect fuse, call custo-
mer service.
Oven and cooking zo-
nes do not heat up.
Fuse defective.
Check and replace fuse, if
necessary.
Cooking zone does not
heat up.
Cooking zone control not
switched on.
Switch on control.
Control or cooking zone de-
fective.
Call customer service.
Inner circuit of a dual-circuit
cooking zone defective.
[
Under no circum-
stances continue to
use the outer circuit
which is still working!
Call customer service.
Oven does not heat up. Oven temperature control or
function switch has not been
switched on.
Set oven temperature control
or function switch as requi-
red.
Electronic timer flashing – the
clock has not yet been set.
Set the clock. See page 19.
Oven light no longer
works.
Lighting defective.
Change the light bulb.
Glass of oven door bro-
ken.
Switch off the appliance,
call customer service.
Door sealing damaged.
Change the door sealing.
Strong smells from
oven in spite of öko-
therm
®
catalyst.
ökotherm
®
catalyst must be
regenerated.
See left column.
Strong vinegar smell
when preparing.
Baking with sour dough or
with yeast, food containing
alcohol and using a fan-assi-
sted mode.
Use a mode without fan-as-
sistance, e.g., top heat/bot-
tom heat.
Fruit juice or protein
stains on enamelled
parts.
Moist cake or meat juices.
Harmless changes in the en-
amel, cannot be remedied.
Production-no. oven:
Model designation oven
