EEH 6350.0
27
Cleaning and care
You should carefully read this chapter before you use your appliance the first
time. If cleaned correctly and looked after regularly the appliance will remain
beautiful and clean for many years. Here you will find tips concerning the
careful cleaning and of the individual surfaces and how to look after them.
For all surfaces
[
Steam and/or pressure cleaning machines must not be used to clean the
appliance! This can damage the unit resulting in risk of
personal injury
.
[
Risk of burning!
Make sure the appliance has cooled down before
cleaning.
[
Please note the instructions of the cleaning agents.
Clean the appliance each time you use it. Not removed dirt will burn into the
surface the next time you switch it on and these incrustations can often be
not removed anymore.
Use a damp cloth or a soft sponge with warm water containing a small amount
of detergent to clean light amounts of dirt from the surface. Always wipe off
the surface completely with cold water to remove cleaning agents residues
which could cause discolouring and stains. Wipe dry afterwards.
F
You can find information in the following paragraphs concerning the
individual surfaces and parts and how to remove heavy dirt.
F
VSR O-FIX-C is perfect for the cleaning of glass ceramic, enamel and the
coated inside of the door. You can obtain this cleaning agent from
KÜPPERSBUSCH customer service.
Do not use any
- aggressive or bleaching cleaning agents containing for example active oxy-
gen, chlorine or corrosive components.
- abrasive or aggressive cleaning or scouring agents such as steel wool,
soap-impregnated steel wool, metal or plastic sponges or similar agents
with an abrasive surface.
Remove caking
Heavy dirt should first be soaked – best with a wet cloth. Afterwards it is easier
to remove the dirt.
Please note the information for the cleaning
scraper
[
Caution! Risk of cutting! The blade of the cleaning scraper is very sharp!
Always keep the cleaning scraper flat on the
surface and push the caking away.
[
Do not scratch the surface with the
edge of the scraper and take care not
to damage the sealing with the edge.
The use of oven sprays - information
[
Please follow the instructions of the manufacturer. Oven sprays damage
aluminium, lacquered surfaces and plastic!
[
Do not spray into the opening of the ventilator at the backplate! The öko-
therm
®
catalyst will be destroyed if oven spray is used.
For environmental reasons you should not use oven spray at all. If you never-
theless want to use it, only spray it in the oven interior and on enamel baking
trays.
Enamel
Oven interior, front, baking trays, drip pan
Some plastic sponges with abrasive side can be used. Some products do how-
ever contain grains in the abrasive side of the sponge which can cause
scratches.
Carefully try out the sponge on a small surface!
F
A cleaning scraper for glass ceramic surfaces is suitable for removing
heavy dirt.
F
To thoroughly clean your appliance we recommend the use of VSR O-
FIX-C. Oven spray may be used.
Stainless steel
Stainless steel door front, control panel, stainless steel hob, telescopic
glide-out shelves (acc. No. 601), backmobil (acc. No. 600A)
[
Stainless steel is very sensitive to scratches!
Do not use a cleaning scraper!
[
Remove any deposits of calcium or any spots of grease, and starch as
soon as possible, or stains will appear!
For the cleaning a cleaning agent for stainless steel can be used.
We recommend to clean once a week stainless steel surfaces with an usual
cleaning agent for stainless steel. This will create a protective film protecting
the stainless steel surface from discolouring.
Glass
Inside of the door – coated glass
[
If possible oven spray should not be used as it can cause the destruction
of the coated glass surface when used frequently.
A cleaning scraper for glass ceramic surfaces is suitable for removing heavy
dirt.
F
To thoroughly clean your appliance we recommend the use of VSR O-
FIX-C or glass detergent.
Door front, control panel
F
Clean the
oven front
with warm water containing a small amount of de-
tergent, with a damp cloth o a soft sponge. You may use glass cleaning
agents.
Glass ceramic hob
[
Sugar and food containing sugar (e.g. marmalade) and melted plastic
must immediately be removed with the cleaning scraper from the hot
cooking surface otherwise the surface can be destroyed when cooling
down.
First remove heavy dirt and food residues with the cleaning scraper when the
cooking surface is still warm.
Clean the cooled down cooking surface with water and a small amount of de-
tergent, with a cleaning agent for glass ceramic surfaces or with VSR O-FIX-
C. Wipe off the surface with clear water then dry it thoroughly.
F
Residues of cleaning agents can cause discolouring the next time you
switch it on. Cloths and sponges which are used for the cleaning of other
surfaces can cause discolouring.
F
Cleaning the glass ceramic surfaces with a cleaning agent protects them
of discolouring, and reduces the danger of damage through sugar and
often can remove discolouring or stains.
