26
EEH 6350.0
The electronic timer with
switch-off function
Setting the clock
F
The clock must be set before first using the oven or after a loss of power
(mains). The oven will not function until the clock is set.
If the clock needs to be set, a dash flashes in the bottom right-hand
corner of the display.
F
Would you like to change the preset time?
Proceed exactly as follows.
– Press the middle button twice. A dash
flashes on the right-hand side of the
display.
– Then immediately set the time you want
with “+” and “-”. The clock starts after
a few seconds, the flashing dash
disappears.
Setting the alarm time
F
If the oven is switched on the timer has a switch-off function: If the timer
runs down the oven switches off. If the oven is not operating the timer
can be used as “reminder”.
– Press the middle button once. A dash
flashes on the left-hand side of the
display, “0.00” appears in the display.
– Use “
+
”/“
-
” to set the timer in hours
and minutes.
After a short time the dash comes on
permanently and the preset time starts
to run.
After the time has run down a signal rings and the oven switches automatically
off. "0.00" appears in the display and the dash flash.
– Press one of the keys to turn off the signal. The oven is switched on again.
F
If the signal is not turned off it stops after approx. 2 min. by itself. The
oven stays off until you convert the oven into the normal mode by
pressing one of the two keys.
