28
EEH 6200.0
What to do if trouble occurs...
[
Repairs may only be carried out by a qualified technician!
You can deal with some problems that occur yourself. First check whether
there has been any operating error. Repairs during the guarantee period are
not free of charge, when they are caused by operating errors or non-
observance of the following instructions:
Replacing the oven lamp
[
Caution: Danger of electric shock! Before you open the cover of the oven
lamp the appliance has to be disconnected from the electricity supply:
Switch off or pull out the fuse!
[
It is imperative to allow the appliance and lamp to cool down before you
replace the lamp. The lamps become very hot after being in use for some
time.
Type: 25 W, 230-240 V, socket: E14
Important:
temperature resistant up to 300 °C!
You can obtain these lamps from KÜPPERSBUSCH customer service or from
your dealer.
Changing the light bulb:
– Unscrew the shelf rack.
– Carefully lever out the glass
cover with a screwdriver.
– Remove the damaged light
bulb and put the new one in.
– Reinstall the glass cover.
Replacing the door sealing
[
Do not use the oven with damaged or missing door sealing!
If the sealing is damaged or cannot be cleaned anymore it has to be replaced.
You can obtain a new sealing from KÜPPERSBUSCH customer service.
Removing the sealing
– To remove the sealing gently pull
each corner out.
Fitting the new sealing
– Clasp one corner after the other into the oven front.
Take care not to deform the hooks!
Rating label
Always indicate the data provided on the rating
label when calling in customer service or
ordering spare parts.
The rating label for the oven is located on the
right-hand side strip and is visible when the
oven door is open.
– Make a note of this information in case you
have to consult our customer service.
You will find the rating label for the hob on the front page of the cooking
surface assembly instructions.
Fault
Cause
Remedy
Heat indicator of a
cooking zone does not
work.
Lighting defective.
Call customer service.
[
Risk of burning, as
there is no temperature
warning.
Not possible to switch
off hob or oven.
Electronic component
defective.
Disconnect fuse, call
customer service.
Oven and cooking
zones do not heat up.
Fuse defective.
Check and replace fuse, if
necessary.
Cooking zone does not
heat up.
Cooking zone control not
switched on.
Switch on control.
Control or cooking zone
defective.
Call customer service.
Inner circuit of a dual-circuit
cooking zone defective.
[
Under no
circumstances
continue to use the
outer circuit which is
still working! Call
customer service.
Oven does not heat up. Oven temperature control or
function switch has not been
switched on.
Set oven temperature control
or function switch as
required.
Oven light no longer
works.
Lighting defective.
Change the bulb.
Glass of oven door
broken.
Switch off the appliance,
call customer service.
Door sealing damaged.
Replace the door sealing.
Strong smells from
oven in spite of
ökotherm
®
catalyst.
ökotherm
®
catalyst must be
regenerated.
See page 27.
Strong vinegar smell
when preparing.
Baking with sour dough or
with yeast, food containing
alcohol and using a fan-
assisted mode.
Use a mode without fan-
assistance, e.g., Top heat/
bottom heat.
Fruit juice or protein
stains on enamelled
parts.
Moist cake or meat juices.
Harmless changes in the
enamel, cannot be remedied.
Production-no. oven
Model designation oven
