background image

26

EEH 6200.0

Cleaning and care

You should carefully read this chapter before you use your appliance the first 
time. If cleaned correctly and looked after regularly the appliance will remain 
beautiful and clean for many years.  Here you will find tips concerning the 
careful cleaning and of the individual surfaces and how to look after them.

[

Never wipe an open grill socket! No water or oven spray may enter it!

For all surfaces

[

Steam and/or pressure cleaning machines must not be used to clean the 
appliance! This can damage the unit resulting in risk of 

personal injury

.

[

Risk of burning! 

Make sure the appliance has cooled down before 

cleaning. 

[

Please note the instructions of the cleaning agents.

Clean the appliance each time you use it. Not removed dirt will burn into the 
surface the next time you switch it on and these incrustations can often be 
not removed anymore.

Use a damp cloth or a soft sponge with warm water containing a small amount 
of detergent to clean light amounts of dirt from the surface. Always wipe off 
the surface completely with cold water to remove cleaning agents residues 
which could cause discolouring and stains. Wipe dry afterwards.

F

You can find information in the following paragraphs concerning the 
individual surfaces and parts and how to remove heavy dirt.

F

VSR O-FIX-C  is perfect for the cleaning of glass ceramic, enamel and 
the coated inside of the door. You can obtain this cleaning agent from 
KÜPPERSBUSCH customer service.

Do not use any

- aggressive or bleaching cleaning agents containing for example active 

oxygen, chlorine or corrosive components.

- abrasive or aggressive cleaning or scouring agents such as steel wool, 

soap-impregnated steel wool, metal or plastic sponges or similar agents 
with an abrasive surface.

Remove caking

Heavy dirt should first be soaked – best with a wet cloth. Afterwards it is easier 
to remove the dirt.

Please note the information for the cleaning 
scraper

[

Caution! Risk of cutting! The blade of the cleaning scraper is very sharp!

Always keep the cleaning scraper flat on the 
surface and push the caking away.

[

Do not scratch the surface with the edge of 
the scraper and take care not to damage the 
sealing with the edge.

The use of oven sprays - information

[

Please follow the instructions of the manufacturer. Oven sprays damage 
aluminium, lacquered surfaces and plastic!

[

Do not spray into the opening of the ventilator at the backplate! The 
ökotherm

®

catalyst will be destroyed if oven spray is used.

For environmental reasons you should not use oven spray at all. If you 
nevertheless want to use it, only spray it in the oven interior and on enamel 
baking trays.

Enamel

Oven interior, front, baking trays, drip pan, enamel hobs

Some plastic sponges with abrasive side can be used. Some products do 
however contain grains in the abrasive side of the sponge which can cause 
scratches.
Carefully try out the sponge on a small surface!

F

A cleaning scraper for glass ceramic surfaces is suitable for removing 
heavy dirt.

F

To thoroughly clean your appliance we recommend the use of VSR O-
FIX-C. Oven spray may be used - 

 however not on an enamel hob

.

Stainless steel

Stainless steel door front, control panel,  stainless steel hob, telescopic 
glide-out shelves (acc.  No. 601), backmobil (acc. No. 600)

[

Stainless steel is very sensitive to scratches!

Do not use a cleaning scraper!

[

Remove any deposits of calcium or any spots of grease, and  starch as 
soon as possible, or stains will appear!

For the cleaning a cleaning agent for stainless steel can be used.

We recommend to clean once a week stainless steel surfaces with an usual 
cleaning agent for stainless steel. This will create a protective film protecting 
the stainless steel surface from discolouring.

Glass

Inside of the door – coated glass

[

If possible oven spray should not be used as it can cause the destruction 
of the coated glass surface when used frequently.

A cleaning scraper for glass ceramic surfaces is suitable for removing heavy 
dirt.

F

To thoroughly clean your appliance we recommend the use of VSR O-
FIX-C or glass detergent.

Door front, control panel

F

Clean the 

oven front 

with warm water containing a small amount of 

detergent, with a damp cloth o a soft sponge. Do not use glass cleaning 
agents.

Glass ceramic hob

[

Sugar and food containing sugar (e.g. marmalade) and melted plastic 
must immediately be removed with the cleaning scraper from the hot 
cooking surface otherwise the surface can be destroyed when cooling 
down.

First remove heavy dirt and food residues with the cleaning scraper when the 
cooking surface is still warm.

Clean the cooled down cooking surface with water and a small amount of 
detergent, with a cleaning agent for glass ceramic surfaces or with VSR O-
FIX-C. Wipe off the surface with clear water then dry it thoroughly. 

F

Residues of cleaning agents can cause discolouring the next time you 
switch it on. Cloths and sponges which are used for the cleaning of other 
surfaces can cause discolouring.

F

Cleaning the glass ceramic surfaces with a cleaning agent protects them 
of discolouring, and reduces the danger of damage through sugar and 
often can remove discolouring or stains.

Summary of Contents for EEH 6200.0















Reviews: