33
Authorised utilisation of the
cooker hood
The appliance is intended for
household use.
The manufacturer is not liable for any
damage resulting from utilisation other
than that authorised or from any
incorrect operation of the appliance.
Technical safety
Prior to connecting the cooker hood,
it is essential that the connection
data (voltage and frequency) on the
identification plate be compared with the
current network data (see the section on
“electrical connection”).
These figures must tally in order to avoid
damage to the appliance. In case of
doubt, please contact your electrician.
The electrical safety of the cooker
hood can only be guaranteed if it is
connected to a protective conductor sys-
tem which has been installed in accord-
ance with regulations. It is absolutely es-
sential that this fundamental safety
prerequisite has been fulfilled. In case of
doubt, have your home wiring system
checked by an expert. The manufacturer
cannot be held responsible for damage
caused because there was no protective
conductor or because of a disconnected
conductor (e.g. an electric shock).
Installation, maintenance or repair
work carried out improperly may put
the user at considerable risk. Please
have installation and maintenance work
as well as repairs to electrical appliances
carried out by skilled specialists only.
Should the connecting cable of the
cooker hood be damaged, it is
essential that it be replaced by the same
type of connecting cable, available
through customer service.
This appliance has been construct-
ed in accordance with specified
safety regulations; improper utilisa-
tion, however, can result in injury to
persons and damage to property.
Please read the instructions for use
carefully prior to initial use of your
appliance. They provide important
information on safety, assembly,
use and maintenance, so you will
protect yourself and avoid damage
to your appliance.
Keep the instructions for use in a
safe place and pass them on to any
subsequent owner of the appliance.
Safety instructions and warnings
Summary of Contents for EDIP 649.1
Page 8: ...37 Appliance specification...
Page 17: ...46 Assembly equipment Fitting...