34
For internal use only
12.11 … Faults develop during operation?
12.12 … The following messages are shown?
The machine does not switch on.
•
Switch on the main switch.
•
Check the power connection.
•
Check the fuses of the house wiring system.
Coffee is not hot enough.
•
Pre-heat cups with hot water.
•
Adjust the brewing temperature.
No hot water or steam.
•
Switch off the machine! Clean the nozzle with a needle.
Machine takes a long time to heat up.
•
Descale the machine.
The brewing unit cannot be removed
for cleaning purposes.
•
Close the door.
•
Switch on the machine (brewing unit will be initialised).
Too little or no coffee dispensed.
•
Check the grinding setting and the AromaControl.
Lighting defect.
•
Switch on the main switch.
•
Adjust the lighting.
Standby
Press button
Menu/OK.
descale
Descale the machine.
Fill up the water tank
Fill up the water tank with fresh water.
Coffee bean box empty
Fill up the coffee bean box and continue to drive.
Empty the salt box
Open the flap and empty the salt box (12 draughts).
Z
The main switch must be kept under pressure.
The salt box must have been removed for at least
5seconds.
The machine resets.
No brewing unit
Putting the brewing unit in correctly
No salt box
Insert the drip tray and the salt box separately.
Lock the door
Close the door.
Ventilate
Deaerate the system (for initial operation) Press button .
Brewing unit blocked
Call Customer Service. Main switch ON/OFF.
Grinder blocked
Call Customer Service technicians Main switch ON/OFF.
