19
For internal use only
If the machine is operated with the AquaPrima water filter, the “water filter – ON“ setting should be
activated in the user settings.
This means that only every second cycle of the water flow-through metre is registered as an impulse, so
that the machine only needs to be descaled half as frequently. It is important that the device does not
register whether the water filter has actually been installed; it is the user settings that are decisive. If the
machine is operated without a filter it is essential that the water filter setting be set at “OFF“ .
9.2
Inserting the AquaPrima water filter
1.
Switch off the appliance.
1.
After removing the filter from the packaging, set the date on the
display at the current month.
2.
Open the control panel by pressing on the bar handle and then
remove the water tank.
3.
Insert the water filter according to the instructions in the package.
4.
Fill in a max. of 1.7l tap water.
5.
Replace the water tank.
AquaPrima
ON
AquaPrima
OFF
360°
360°
360°
360°
(1 turn)
(1 turn)
(1 turn)
(1 turn)
(1 impulse)
